Phone(s): 519-271-1570

38 Humber St.
Stratford Ontario
N5A 6S4

Scag SFC-30

Specifications

Model	SFC-30	Category Name	Lawn Care	Year	2025
Sale Type	New	Manufacturer	Scag	Tracking Width	28.75"
Height - Max Operating	45.25"	Height - Lowest Operating	36.75"	Operating Weight - Bagging	220 lbs.
Width (w/ Discharge Chute)	36.75"	Operating Weight - Mulching	214 lbs.	Operating Weight - Discharging	213 lbs.
Width (w/ Discharge Block Off Plate)	31.5"	Height - W/ Handle Bar In Storage Position	57.5"	Length - Max (handles In Lowest Operating Position)	73.5"
Length - Minimum (handles In Highest Operating Position)	66"	Length - Transport (handles In Upright Transport Position)	41"	Price	Contact for price CAD

Description

SFC-30

FINISH CUT WALK-BEHIND

Welded and fabricated using military-grade steel for years of dependable performance, the SFC-30 Finish Cut Walk-Behind Mower is no pushover. Packing big productivity and versatility into a compact form, this commercial-grade machine delivers a beautiful, professional quality-of-cut, helping you put the finishing touches on the job or at home.

FEATURES

MOW WITH EASE

Front Swivel Caster Wheels

Front swivel caster wheel model offers increased ease of manueverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.

FULLY FABRICATED AND WELDED STEEL CUTTER DECK

Military-Grade Steel - Deck

Extra-strong fabricated (non-stamped) steel cutter deck features 14-gauge, grade 100 Military-Grade steel deck shell, 12-gauge spindle reinforcement plate and ¼” side reinforcement bar, all while delivering the quality-of-cut you’d expect from a Scag mower.

FULLY FABRICATED AND WELDED STEEL FRAME

Military-Grade Steel - Frame

Extra-strong, fully fabricated steel frame (not cast aluminum). The Military-Grade steel spec used on the SFC30 is over 200% stronger than standard drawing steel found in common stamped frames and decks in this machine class.

SINGLE POINT HEIGHT-OF-CUT ADJUSTMENT

Fine-Tuned and Simple

Adjust the height-of-cut from a single location rather than at all four corners or having to adjust the front and back tires separately. Refine your height settings with adjustments from 1.5” to 5” in .25” increments.

OFFSET BLADE SET UP

Simplified Deck Drive System

An offset blade design is less complex and easier to maintain than traditional timed deck setups. This more robust system results in potential belt replacements taking less than half the amount of time to repair/replace compared to timed deck systems. Image shown with bagging baffle.

SCAG LEVEL QUALITY-OF-CUT

Unmatched Performance

The large cutting chamber helps process more grass while being able to eat through wet and lush spring time grasses more efficiently. Cutter deck discharge opening is oversized for its class.

OPERATOR CONTROL PANEL

Ergonomic Controls

Angles of operator station controls match the natural angles of your outstretched hands. All controls are within easy reach: blade brake engagement, drive engagement, recoil start, throttle/choke, hour meter and park brake.

OVERSIZED ADJUSTABLE CONTROLS

Achieve Maximum Comfort

Oversized handles feature internally routed cables to protect from potential snags. Handle features tool-free adjustment, up and down, to fit operator height preference. Additional vertical adjustment setting for transportation or storage.

DISCHARGE – MULCH – BAG

3-in-1 versatility

The SFC30 delivers the ability to discharge, mulch or bag. All options come as standard equipment, allowing the operator to change on the fly as needed. Discharge: discharge chute – Mulch: deck plug and mulch plate – Bag: bagging baffle, mulch plate and fabric bag

POWERFUL TRANSMISSION & ENGINE COMBO

Maximum power for tough cuts

The combination of a GT MV702 best-in-class transmission and Kohler CV224 engine bring the power for optimum performance in the toughest of cutting conditions.

ENGINE AND DECK COMBINATIONS

Model	Deck Width	Engine	Horsepower
SFC-30-7CV	30″	Kohler® Command PRO® CV224	7
SFC-30-7CV-CA	30″	Kohler® Command PRO® CV224 (California)	7
SFC-30-7CV-S	30″	Kohler® Command PRO® CV224 – swivel front caster	7
SFC-30-7CV-S-CA	30″	Kohler® Command PRO® CV224 – swivel front caster (California)	7

GENERAL

Rear_Tires

10.5" x 3" rubber tire w/ glass-filled polypropylene wheel

Front_Tires

9” x 2.25” rubber tire w/ glass-filled polypropylene wheel

Total_Fuel_Capacity

1 gallon (0.37 gallon capacity for California models)

DRIVE SYSTEM

Parking_Brake

Hand lever

Drive_System_Type

GT MV 702 Transmission

Forward_Ground_Speed

Up to 4 mph

DECK

Type

Extra-strong, fully fabricated and welded steel cutter deck. Offset blade, non-timed deck setup.

Spindles

Aluminum housing with sealed ball bearings.

Deck_Lift

Hand lever. Single-point adjustment.

Blade_Type

Optimized for maximum performance whether discharging, mulching or bagging

Bag_Capacity

2.5 Bushels

Construction

14-gauge, grade 100, Military Grade steel deck shell with 12-gauge spindle reinforcement plate. ¼” trim side reinforcement bar offers extra protection against impacts.

Cutting_Height

1.5" to 5" in .25" increments.

Cutting_Widths

30"

Blade_Engagement

Blade brake clutch allows operator to disengage cutter blades without shutting off the machine.

Discharge,_Mulch,_Bag

Standard