Toro Greensmaster® TriFlex™ 3300

Specifications

Model	4510	Category Name	Lawn / Garden	Year	2025
Sale Type	New	Manufacturer	Toro	Height	80.83" (205 cm)
Length	98" (249 cm)	Weight	1,161 lbs. (526 kg)	Controls	Ignition: Off/Run/Start. Throttle: Low - High Idle. Choke (AC only): Opens / Closes choke plate. Parking Brake: Off - On. Traction Pedal: Rev/Neutral/Forward Joystick: Raises/lowers reels also tap off feature for clean up pass. Functional Control Lever sets neutral/mow/transport limits for traction pedal. Diagnostic Light: Indicates system faults to assist in resolving issues.
Mowing Speed	0 - 5 mph (0 - 8 km/h)	Width Of Cut	59" (150 cm)	Fuel Capacity	6 U.S. gal. (22.7 L)
Overall Width	70.62" (179 cm) with reels	Reel Diameter	5 in. (12.7cm)	Transport Width	Outside at Tires: 61" (154.94 cm) Outside at Reels: 70.62" (179 cm)
Ground Clearance	4.5" (11.4 cm)	Number Of Blades	11, 14, 8	Electrical System	12-volt lead acid, group size U1, with 300 minimum CCA at 0° F and 34 minutes reserve capacity at 85° F/25 amps draw. 50 amp alternator. Seat switch. Harness terminals and fuse slot available for optional lights installation.
Bedknife Adjustment	Dual screw, indexed “click” adjustment to the reel; detents corresponding to 0.0007" (0.018 mm) bedknife movement for each position.	Height Of Cut Range	Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062" - 0.297" (1.6 - 7.5 mm). With high HOC kit, range is 0.297" - 1.0" (7.5 - 25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed.	Ground Speed - Forward	0 - 10 mph (0 - 16 km/h)
Hydraulic Fluid Capacity	6.8 U.S. gal. (25.7 L)	Clip Frequency/Backlapping	Adjustable up to 2050 RPM at 2850 engine RPM. Backlapping standard.	Cutting Unit Type/Configuration	Triplex, balanced cutting units with precision die-cast aluminum cross member with two bolt-on die-cast aluminum side plates. Cutting units feature quick disconnect for removal/installation and are interchangeable to all positions. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented)
Price	Contact for price CAD

Description

Suspension system is designed to provide a slight lift to the inside of the cutting units during turns resulting in more consistency of cut
Stay ahead of golfers and get more greens cut in a shorter time
The most advanced cutting units in the industry
Switch from cutting greens to cutting a fairway in just minutes
Perform routine maintenance and repairs with easy access to the center cutting unit
Turf Guardian™ leak detection technology alerts the operator to any leaks
Operate efficiently in energy savings mode where engine RPM's are reduced and the all-electric reel drive maintains a constant reel speed
Redesigned tires deliver uniform loading across the entire cross-section to reduce visible tire tracks
Clipping capture system retains nearly all grass clippings for a cleaner and healthier cut
Suspension system maintains full floatation range to prevent gouging or scalping when going over undulations
Wheel layout and turning radius prevent accidentally dropping the rear wheel into a nearby sand bunker while turning
Integrated "Flex" linkage system allows cutting units to pivot around the center of the front roller
Deliver a consistent, high quality cut and superior after cut appearance, while reducing maintenance

The Greensmaster® TriFlex™ Mowers were designed to take precision cutting on a greens mower to a completely new level. Adopting the proven Flex suspension, the cutting units float freely over contours and undulations of the green resulting in a superior quality of cut and aftercut appearance. Improved serviceability is another major advantage of the TriFlex™ models. The tool-free, quick-change cutting units make servicing the cutting units fast and easy and a lift-gate footrest provides easy access to the center cutting unit.

FEATURES

Lift-In-Turn Cutting Units

The suspension system is designed to provide a slight lift to the inside of the cutting units during turns to deliver a consistently level cut and to reduce "triplex ring" for improved playability and turf health.

Faster Transport Speeds

Ten miles per hour (16.1 km/h) transport speeds will allow you to stay ahead of golfers and get more greens cut in a shorter time.

Balloon Style Tires

Tires have been redesigned to deliver uniform loading across the entire cross-section (load footprint area) to eliminate side wall loading that can create visible tire tracks.

Exclusive Lift-Gate Footrest

Easy access to the center cutting unit facilitates routine maintenance and repairs, simplifies adjustments, and eliminates the need to put the traction unit on a lift for cutting unit service saving you time, money, and frustration.

Leak Detection

The dependable Turf Guardian™ leak detection system provides immediate audio and visual indication of possible hydraulic fluid leaks.

Maximize Fuel Economy to Improve Cost of Ownership

With more than enough horsepower and highly efficient components, the TriFlex Hybrid models operate efficiently in energy savings mode. While in this mode, engine RPM's are reduced and the all-electric reel drive maintains a constant reel speed. This results in reduced fuel consumption and noise while maintaining quality of cut, performance, and productivity.

Proven Flex Suspension (Patented)

Superior contour following capability utilizes an integrated "Flex" linkage system to allow cutting units to pivot around the center of the front roller to master undulations and prevent side-to-side scrubbing of the putting surface.

Perfect Triangle Wheel Stand Design

The Triangle Wheel Stand places the rear wheel track within the radius of the front wheel, which prevents accidentally dropping the rear wheel into a nearby sand bunker while making the turn for the next mowing path.

Double A-Arm Suspension

The suspension system maintains full floatation range to prevent gouging or scalping when going over undulations.

DPA Cutting Units

The most advanced cutting unit in the industry:• Only two adjustments• Superior height-of-cut retention• No daily greasing (stainless steel bearings)• Consistent cutting edge regardless of reel wear (patented)• Smallest bedknife increment adjustments .007 inch (.178mm)

Tool-Free, Quick-Change Cutting Units

A single operator can go from cutting Greens at 0.125" (3.2 mm) to cutting a Fairway at ¾" (19 mm) in just minutes. The tool-free, quick-change cutting units make it as easy as 1-2-3.

EdgeSeries™ Reels

Dual Precision Adjustment (DPA) cutting units – featuring Toro’s EdgeSeries™ reels combine to deliver a consistent, high quality cut and superior after cut appearance, while reducing maintenance with improved reel edge retention.

Clip Control (Dial-In Clip)

Maintains consistent clip even during clean-up cut when operators slow down.

LITERATURE

Name	Link
GR_TriFlex_eTriFlex_Accessories_020723.pdf	Download