Toro Greensmaster® 3150-Q

Specifications

Model	4358	Category Name	Lawn / Garden	Year	2025
Sale Type	New	Manufacturer	Toro	Height	74.5" (189 cm)
Length	90" (229 cm)	Weight	1,087 lbs. (493 kg)	Controls	Ignition: Off/Run/Start. Throttle: Low - High Idle. Choke (AC only): Opens / Closes choke plate. Parking Brake: Off - On. Traction Pedal: Rev/Neutral/Forward Joystick: Raises/lowers reels also tap off feature for clean up pass. Functional Control Lever sets neutral/mow/transport limits for traction pedal. Diagnostic Light: Indicates system faults to assist in resolving issues.
Mowing Speed	2 - 5 mph (3.2 - 8 km/h)	Oil Capacity	6 U.S. qt. (5.7 L)	Width Of Cut	59" (150 cm)
Fuel Capacity	7 U.S. gal. (26.5 L)	Overall Width	69.7" (177 cm) with reels	Reel Diameter	5 in. (12.7cm)
Transport Width	Outside at Tires: 60" (152.4 cm) Outside at Reels: 69.7" (177 cm)	Number Of Blades	11, 14, 8	Electrical System	12-volt lead acid, group size U1, with 300 minimum CCA at 0° F. 16 amp alternator. Seat switch. Harness terminals and fuse slot available for optional lights installation.
Bedknife Adjustment	Dual screw, indexed “click” adjustment to the reel; detents corresponding to 0.0007" (0.018 mm) bedknife movement for each position.	Height Of Cut Range	Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062" - 0.297" (1.6 - 7.5 mm). With high HOC kit, range is 0.297" - 1.0" (7.5 - 25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed.	Ground Speed - Forward	0 - 10 mph (0 - 16.1 km/h)
Hydraulic Fluid Capacity	6.8 U.S. gal. (25.7 L)	Clip Frequency/Backlapping	Adjustable up to 1975 RPM at 2850 engine RPM. Backlapping standard.	Cutting Unit Type/Configuration	Cutting units are completely free-floating, each attaching to the tractor by direct pull links and lifted by a centered lift arm. Baskets are supported by carrier frames that are ground following. Cutting unit floatation is unaffected by basket content. Grass baskets are all interchangeable and accessible from the front of the machine. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented)
Price	Contact for price CAD

Description

Placement of the center cutting unit gives the machine much higher hillside stability.
Wheel layout and turning radius prevent accidentally dropping the rear wheel into a nearby sand bunker while turning.
All components are conveniently located for servicing.
Turf Guardian™ leak detection technology alerts the operator to any leaks.
The most advanced cutting unit in the industry.
Simplified and convenient controls for easy operation.
Deliver a consistent, high quality cut and superior after cut appearance, while reducing maintenance

The Greensmaster 3150-Q is distinguished for its field-proven performance and exceptional quality of cut. Equipped with patented DPA cutting units for a superior cut and minimal maintenance, convenient controls for easy operation, and ample power to handle any application–it’s no wonder this classic model has been trusted over the years to deliver the performance golf courses demand with a putting surface that exceeds expectations.

FEATURES

Safe Operation

The placement of the center cutting unit, located between the the front traction wheels, along with the front center basket removal, allows a low mounting design of the transmission and engine. This lowers the center of gravity, giving the machine much higher hillside stability.

Maintenance Ease

All components, especially those that require daily inspection and routine maintenance, are conveniently located for servicing. The Greensmaster® 3250 has fewer hydraulic lines and connectors. All hydraulic components are positioned for easy visual inspection.

Leak Detection

The dependable Turf Guardian™ leak detection technology alerts the operator if a leak occurs. Optional on the Greensmaster® 3250.

Simplified Controls

Simplified and convenient controls for easy operation.

Perfect Triangle Wheel Stand Design

The Triangle Wheel Stand places the rear wheel track within the radius of the front wheel, which prevents accidentally dropping the rear wheel into a nearby sand bunker while making the turn for the next mowing path.

DPA Cutting Units

The most advanced cutting unit in the industry:• Only two adjustments• Superior height-of-cut retention• No daily greasing (stainless steel bearings)• Consistent cutting edge regardless of reel wear (patented)• Smallest bedknife increment adjustments .007 inch (.178mm)

EdgeSeries™ Reels

Dual Precision Adjustment (DPA) cutting units – featuring Toro’s EdgeSeries™ reels combine to deliver a consistent, high quality cut and superior after cut appearance, while reducing maintenance with improved reel edge retention.

LITERATURE

Name	Link
GR_TriFlex_eTriFlex_Accessories_020723.pdf	Download