ID # 13488740


Call for Price
A New Generation in V-Plow Performance

The MVP 3™ provides a whole new slant in V-plow performance and durability.  From the flared blade design and the standard UltraLock double-acting cylinders, to the patented trip edge design, the MVP 3 provides all the performance features you need for unmatched V-plow productivity.
4718 Efficiency Calculator

CLICK HERE to calculate time savings versus your current plow

3858 Flared V-Plow Wings


MVP 3™ V-plow blades soar from a 31” center height up to 39” at the outer edge on the 9’ 6” models. So whether you’re busting through the big drifts, carrying and stacking, or windrowing wide areas, these wings give you all the carrying capacity and snow rolling performance you need to get the job done fast.
4988Introducing Stainless

The WESTERN MVP 3™ is now available in 14-gauge stainless steel, for low maintenance corrosion-resistant performance. With V-plow blades that soar from a 31” center height up to 39” at the outer edge on 9’ 6” models, you can cut through the big drifts, carry more snow, and get the job done fast. The MVP 3 in stainless is as hard working as it is sharp-looking.


Reinforced V-Plow Blade Structure

The MVP 3™ provides the proven structural features that separate a WESTERN®
V-plow from the rest, and so much more.
Eight Vertical Ribs | On the 8’ 6” and 9’ 6” models, and six on the 7’ 6” models
Enhanced Center Hinge | With three connection points for added strength
Larger Center Hinge Pin | 1¼“ diameter heat-treated steel for more durability
Bigger Lift Ram | 1¾“ diameter cylinder for more lifting power
Power Bar | Provides added reinforcement across the entire back of blade for increased structural rigidity
Improved T-Frame Design | For additional strength
Dual Trip Edge Protection

Each blade features independent trip edge protection to get over bumps and obstacles, whether in vee, scoop, or straight-blade configuration, helping to protect the plow, the truck and the operator. Since only the edge trips, snow stays in front of the blade, so you can keep on going without dumping the entire load of snow.
Double-Acting Cylinders Standard

UltraLock double-acting cylinders are standard on the MVP 3 allowing the operator to lock the wings together to use the V-plow in straight blade mode, with single button control. Double-acting cylinders also hold the wings firmly in place, for clean, efficient back dragging.

Steel Cover for Center Hinge

The steel top center gap cover and formed cutting edges reduce snow leakage in all blade positions.
UltraMount® 2 Snowplow Mounting System

An enhanced version of the popular UltraMount® mounting system

    Fast and easy – no tools required!
    Extra wide receiver brackets for easy drive-in alignment
    New one-piece lift frame design for added strength and durability
    Simple mechanical connecting hook
    Rotating pivot bar keeps attaching points level
    Blade pivots while plowing for a cleaner scrape
    Chain lift system for higher stacking and safe emergency transport
    Removable receiver brackets for off-season ground clearance
Reliable Hydraulics

Western Products manufactures its own hydraulics components to assure the highest quality and reliability standards. So you get a hydraulics system that's not only fast and responsive, but one that's built to last season after season.

    Fast responsive hydraulics for maximum snow plowing efficiency
    Fully enclosed components are protected from the elements
Chain Lift System

    With the chain lift system, you get instantaneous “float” when lowering the blade. Unrestricted, the blade can freely follow the contours of the plowing surface for a cleaner scrape.
    With the chain lift you can stack higher because you’re not limited by the hydraulic ram stroke, unlike cylinder lift systems, which can only pull the snow plow up as far as the limits of the cylinder’s range.
    In the rare event of a hydraulic failure, you can push the snow plow up into a snowbank and “short chain” the snow plow by attaching it to the specially designed bracket and safely transport the snow plow back to the shop.

Universal Intuitive Control Options

Universal Intuitive Control Options   

Choose between the CabCommand hand-held control option, or the joystick control for efficient, precise and intuitive blade control.

CabCommand Control Option

    Power “on” and “float” LED
    Backlit for night operation
    Coil cord for easy mobility

Joystick Control Option

    Compact to fit anywhere
    On/off indicator light
    Plug-in connecter for easy removal
3876One Truck.  One Control.  Any Plow.

The FLEET FLEX electrical system provides true fleet interchangeability among current UltraMount® and UltraMount® 2 mounted snow plows. The same handheld or joystick control operates the following WESTERN® snow plows.

            WIDE-OUT™            PRO PLUS®

            PRODIGY™              PRO-PLOW®

            MVP 3™                    MIDWEIGHT™

            MVP PLUS™            HTS™


Features include:

    Programmable "soft-stop" and "one-touch" float
    SECURITY GUARD™ Plow Anti-Theft System
SECURITY GUARD™ Anti-Theft System

The exclusive WESTERN® SECURITY GUARD™ snow plow anti-theft system is a safe and secure way to electronically “lock” your snow plow when it is detached from your truck.

    Electronically synchronizes your snow plow control and plow module
    When activated, SECURITY GUARD disables the electrical control system and renders the plow inoperable to unauthorized users
    Activate or deactivate at your discretion

Click here for more information 
NIGHTHAWK™ Halogen Headlamps

    State-of-the-art reflector optics
    Smooth wide beam pattern
    Robust two-stud mounting
    Watertight adhesive-bonded housing
    Long life halogen bulbs

ULTRAFINISH™ Baked-On Powder Coat

The ULTRAFINISH™ powder coat provides outstanding protection against wear and rust.

    Eight-wheel shot blaster pre-treatment removes mill scale and abrades surfaces for optimum adhesion
    Multi-stage pre-wash provides superior surface preparation
    Epoxy primer is applied to enhance powder adhesion
    Robotic guns deliver precise, consistent powder coat coverage
    Final baking process provides a long-lasting hard-as-nails WESTERN red, that’s become synonymous with quality
Model Blade Width Blade Height Blade Gauge Trip Springs Vertical Ribs Angling Rams Plowing Width
(full angle)
Approx. Weight
(less mount)
Disc Shoes Cutting Edge
SS or PC
7' 6" 37" at end
31" at hinge
14 4 6 1¾" x 11" 6' 7" full angle
6' 4" scoop
6' 10" full
885 lb optional 3/8" x 6"
SS or PC
8' 6" 38" at end
31" at hinge
14 4 8 1¾" x 11" 7' 5" full angle
7' 2" scoop
7' 8" full V
940 lb optional 3/8" x 6"
SS or PC
9' 6" 39" at end
31" at hinge
14 6 8 1¾" x 11" 8' 6" full angle
8' 2" scoop
8' 7" full V
1022 lb optional 1/2" x 6"
MVP 3 Poly 8' 6" 38" at end
31" at hinge
1/4" poly 4 8 1¾" x 11" 7' 5" full angle
7' 2" scoop
7' 8" full V
890 lb optional 3/8" x 6"
MVP 3 Poly 9' 6" 39" at end
31" at hinge
1/4" poly 6 8 1¾" x 11" 8' 6" full angle
8' 2" scoop
8' 7" full V
972 lb optional 1/2" x 6"

MVP 3™ V-Plow
Sale Type
Videos Documents